Page 1 of 1
Meter Measuring Command
Unread postPosted:May 27th, 2018, 12:44 pm
by Danslayer8
I dont know if this is possible or im asking too much but what if mods can use a command to measure distance instead of using ballistics tracker to accurately pinpoint distances.
-Aim your crosshair at the ground or whatever solid object there is like the ground
-Do /pinpoint 1 to pinpoint that pixel or whats it called.
-GO to the other place and do /pinpoint 2
-It measures the distance between the 2 points
-Accurate and easy.
(I dont know if im asking for too much.)
Re: Meter Measuring Command
Unread postPosted:May 27th, 2018, 5:50 pm
by Loxtonjoel
What for?
Re: Meter Measuring Command
Unread postPosted:May 27th, 2018, 11:45 pm
by Danslayer8
When People argue over the distance of where they were killed during a raid.
When you have a rangefinder you have to point it at the solid object, mostly the walls.
But what if you need to measure from groundpoint to other groundpoint (hard to explain)
You would have to be at the exact same point the defender, raider, civilian was but Higher to point your gun at the ground and for the rangefinder to measure the distance. But that adds more distance due to the fact you are higher than the exact point.
Re: Meter Measuring Command
Unread postPosted:May 28th, 2018, 1:30 am
by Loxtonjoel
When People argue over the distance of where they were killed during a raid.
When you have a rangefinder you have to point it at the solid object, mostly the walls.
But what if you need to measure from groundpoint to other groundpoint (hard to explain)
You would have to be at the exact same point the defender, raider, civilian was but Higher to point your gun at the ground and for the rangefinder to measure the distance. But that adds more distance due to the fact you are higher than the exact point.
I can see what you mean but it's slightly confusing and probably resuble hard to make. Plus the visuals of a groundppint if done could lead to lines around the billable area of a raid but yeah probably not really possible in unturned

Re: Meter Measuring Command
Unread postPosted:May 28th, 2018, 9:51 am
by Aren
Doesn’t seem possible.... would be easier to draw a circle around the object with a plug-in than create this one...
Re: Meter Measuring Command
Unread postPosted:May 29th, 2018, 3:12 pm
by TrippL
+1
I don’t know if it could be made but would be useful if it was.
Re: Meter Measuring Command
Unread postPosted:May 29th, 2018, 4:21 pm
by Miku
We could make it so you can do a command ex. /locate and see your own coords at any time. Then you could just move to the other point and do /locate again.
Re: Meter Measuring Command
Unread postPosted:June 20th, 2018, 4:24 pm
by Brylyth
/locate would be great :v
Also having killer and victim locations printed to logs whenever someone is killed would make life just... <3
Re: Meter Measuring Command
Unread postPosted:June 20th, 2018, 4:55 pm
by Miku
/locate would be great :v
Also having killer and victim locations printed to logs whenever someone is killed would make life just... <3
They already are and have been for a long time..?
Re: Meter Measuring Command
Unread postPosted:June 20th, 2018, 7:31 pm
by Brylyth
Uh, Discord logs, I meant >_>
I can't use regular logs because my ISP charges extra for a static IP.